How to install removable bollards

There are many different situations when you have to install removable bollards so you can set a boundary, but you may not be sure just how to do it. Even if you can use them to set a permanent perimeter, you can install removable parking bollards so you can grant access if the situation demands it. But first you have to learn how to get it done.

When you have a solid concrete base to install it on, you have to drill a hole in the concrete where the base will go. The diameter of the hole must be 150 mm to be sure it will fit or 120 mm with a notch for the hinge for the standard bollards. Wider holes are needed for larger items, but the depth must be 250 mm no matter what model you go for.

If you have to install it in soft ground, it will get a little bit tricky. This happens because you will need to provide footing that is about 400 mm wide as well as 400 mm deep. This is going to allow you to create the base of a bollard so you can be sure it will stay erect with no problems at all. First you have to dig the hole based on these dimensions.

The sleeve has to be put in the middle of the hole so it can be fixated properly. Concrete will be poured in the hole around the sleeve so you must tape the bottom to ensure the concrete will not fill the sleeve from the bottom up. If you do not want to invest a great deal of effort in vain, there are a few other things to do before you pour concrete.

Before you start pouring the concrete, you have to set the sleeve based on where the hinge is going to be positioned. You have to test it before to be sure it will work properly. The top of the sleeve has to be at the same level with the surrounding surface. You have to be sure the concrete will be properly finished and thus it will look nice at the end.

If you want to be sure removable bollards can be operated properly after the concrete is dry, you have to operate the hinge while it is still wet. This will create the needed space in the concrete and you will not have any issues with it in the future. Once you get it done, you have to allow the concrete to dry out and then you can start using the bollard.

These are the steps you have to go through so you can install removable parking bollards. If you are looking for more details about what you can do or you want to find the bollards you can use to set the boundaries of a parking lot, you can visit the site of areasafe.com.au and they will provide all the answers you need about the items you seek.

Removable bollards ( https://www.areasafe.com.au/car-park-and-property-protection/bollards/removable-bollards ) offer you a versatile solution so you can set the boundaries of a parking lot while you can allow access to cars. Now you know how to install them and the site named before can provide the parking bollards ( https://www.areasafe.com.au/car-park-and-property-protection/bollards/parking-space-protectors ) that will help you set the boundaries in any area of the city.