Introduction
Polymer-based lining is the best for the bulk handling of a variety of liquids. However, these linings tend to fail in applications that involve high temperatures or bulk solids, and are likely to cause abrasion & wear. Ceramic lining is mainly used for the storage and handling of materials that include bulk materials, dust or slurries. Alumina-based ceramic lining is the most widely used ceramic lining material for several applications as its wear resistance is on the higher side and is second to that of a diamond.
Moreover, alumina-based ceramic lining can be cast in several shapes and sizes at a high melting point, high mechanical strength and high hardness. Maintenance in heavy-duty applications can be radically reduced with the usage of ceramic lining as it gradually reduces downtime and improves efficiency & productivity, thereby marginally reducing the operating cost.
Request For Sample @ https://www.factmr.com/connectus/sample?flag=S&rep_id=2023
Ceramic lining materials offer numerous benefits throughout their scope of applications. Ceramic lining maintains a smooth surface structure while providing abrasion and wear & corrosion resistance. Moreover, ceramic lining offers high heat resistance and possesses high tensile strength. Ceramic lining materials exhibit a lower value for thermal expansion as compared to plastics & metals and hence, are better alternatives for high temperature applications.
Ceramic lining also exhibits a longer service life. Ceramic lining is likely to be bonded by adhesives, bolts or rivets to the substrate material. Several factors, such as the particle size of the product, volume of the flowing material, velocity, impact abrasion, etc., should be taken into consideration while using ceramic lining.
Ceramic Lining Market: Dynamics
Ceramic lining is considered to be very cost-effective and has proved to be profitable to end users. Owing to its ability to improve the service life of processing equipment by well over 15-20 times, the ceramic lining market is expected to continue to grow throughout the forecast period. The surge in the end-use segments, especially the mining & metal processing and cement industries, is also expected to boost the ceramic lining market. Growth in the population as well as the construction industry worldwide is also expected to contribute to the growth of the ceramic lining market.
Among polymer linings, solvent-borne linings outperform waterborne and powder-based linings. However, environmental policies are likely to prevent end users from adopting waterborne and powder-based linings, and ceramic lining is expected to act as a potential alternative. This is also expected to significantly boost the ceramic lining market.
However, the availability of alternative materials is likely to hamper the growth of the ceramic lining market. Rubber lining materials and refractories exhibit similar or better properties as compared to ceramic lining, and are used as substitutes to ceramic lining.
Ceramic Lining Market: Regional Outlook
Regionally, the mining and metal processing segment appears to be strong in China and the whole of Asia Pacific, owing to which Asia Pacific is estimated to be one of the prominent regions in the ceramic lining market. The China ceramic lining market is expected to register a healthy growth over the forecast period. The mature markets of North America and Europe are expected to follow the Asia Pacific ceramic lining market due to the booming construction industry in these regions. The ceramic lining market in the Middle East & Africa and Latin America regions is expected to grow at an appreciable pace.
Some of the market participants in the global ceramic lining market identified across the value chain include Corrosion Engineering, Inc.; Xiamen Innovacera Advanced Materials Co., Ltd.; Trelleborg AB; Metso Corporation; Ceresist, Inc.; Poxytech (Pty) Ltd.; Hofmann Engineering & Marketing Pvt. Ltd.; CoorsTek Inc. and Wegusta Holland BV.
Request For Brochure @ https://www.factmr.com/connectus/sample?flag=B&rep_id=2023
This analytical research study imparts an all-inclusive assessment on the market, while propounding historical intelligence, actionable insights, and industry-validated & statistically-upheld market forecast. Verified and suitable set of assumptions and methodology has been leveraged for developing this comprehensive study. Information and analysis on key market segments incorporated in the report has been delivered in weighted chapters. A thorough analysis has been offered by the report on
Report Analysis @ https://www.factmr.com/report/2023/ceramic-lining-market
Compilation of authentic and first-hand intelligence, insights offered in the report are based on quantitative and qualitative assessment by leading industry experts, and inputs from opinion leaders & industry participants around the value chain. Growth determinants, macroeconomic indicators, and parent market trends have been scrutinized and delivered, coupled with the market attractiveness for each market segment encompassed. Qualitative impact of growth influencers on the market segments across regions has also been mapped by the report.
