Automotive injector nozzle is all set to witness an affluent adoption rate with the proliferation of passenger and commercial vehicles with diesel and gasoline operated engines. Moreover, escalating preferences for fuel efficient engine technologies are also likely to push use of automotive injector nozzle by a remarkable margin. Fact MR has published a holistic research study on ‘Automotive Injector Nozzle Market’ for the forecast timespan of 2017 to 2022. The report reckons that the automotive injector nozzle market is likely to touch a valuation of around US$ 5.7 Bn by 2022 end.
Design developments in injectors and injector nozzles are aimed at optimizing the breaking up process which in turn determines efficiency of ignition and combustion process. Despite the introduction of multiple innovation in this regard, the fuel injection engineering community remains bemused in fathoming complete breakup process, in particular primary breakup mechanism. Recently, computer fluid dynamics (CFD) simulation has been used to understand the mechanism of primary breakup and importance of nozzle geometry on spray structure. Manufacturers in the automotive injector nozzle market have started incorporating simulation process during in development of injector nozzle design for new high-performing engines with enhanced fuel economy and lower emission.
The prime difference between piezo injectors and other diesel injectors is the presence of piezo material that enables delivery of high speed and precision fuel injection. Leading injector manufacturers have harnessed the piezo technology in their diesel fuel injector nozzle. While the technology is applied for both gasoline and diesel engines, in consistently changing parameters of diesel engine, piezo technology is highly utilized. As the technology is well-proven for its efficiency, manufacturers in the automotive injector nozzle market are actively engaged in delivering piezoelectric diesel injector nozzle for different country-specific fuel qualities and with compatibility at all pressure levels.
Request Free Sample Report @ https://www.factmr.com/connectus/sample?flag=S&rep_id=38
Port fuel injector design has been traditionally and widely used in the internal combustion engines, however, PFI lacks efficiency in delivering fuel economy as compared to gasoline direct injection. Supremacy of GDI technology lies in better engine performance with high injection pressure and accurate fuel delivery. Although port fuel injection technology dominated the automotive injector nozzle market with almost 50% of total market share in 2017, gasoline direct injection technology is estimated to gain over 66 BPS and account for over 6.5% CAGR through 2022.
Emission standards continue to determine the development of the automotive industry, particularly the internal combustion engine. Automotive injector nozzles play a vital role in determining the performance and efficiency of internal combustion engines. All the innovations that are introduced or are under process of R&D are aimed at complying with the strict emission standards for fuel efficiency and reduction of exhaust gases and particulates. Manufacturers across the global automotive industry are adopting novel designs, injector orifices and injector nozzle designs to complement with the stricter emission standards and improve the overall engine efficiency.
Automotive manufacturers’ interest in alternative fuel vehicles is increasing rapidly against the backdrop of growing emphasis on reducing emission levels and sustainable solutions. The market for electric vehicles (EVs) is gaining ground while consistently introducing electric variants of prominent vehicle types. As consumers are becoming more conversant with the issues of global warming and role of automobiles in vitiating the environment, EV demand has seen a significant spike in past half a decade. While automotive injector nozzle is an integral part of internal combustion engines, declining reliance on conventional fuels and emergence of alternative fuel vehicles is expected to confine the progress of the automotive injector nozzle market in the coming years.
The competitive landscape section in the automotive injector nozzle market report delivers an exhaustive list of key market players that are categorized in manufacturers, suppliers and distributors. A comprehensive overview of the product offerings, recent innovation R&Ds in pipeline and notable business strategies are discussed in individual company profile. Key companies profiled in the automotive injector nozzle market include Camcraft Inc., Haynes Corporation, Alternative Fuel Systems Inc., Infineon Technologies AG, Magneti Marelli S.p.A., Keihin Corporation, Eaton Corporation PLC, Robert Bosch GmbH, Denso Corporation, Delphi Automotive PLC, and Continental AG among others.
Manufacturers continue to incorporate technology innovations to deliver improved automotive injector nozzles with greater fuel efficiency and low emissions. For example, Delphi Automotive Systems have incorporated ANSYS computational fluid dynamics (CFD) software to develop the fuel injector nozzle geometry that deliver optimum engine performance.
Enquire about this Report @ https://www.factmr.com/connectus/sample?flag=AE&rep_id=38
Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.
11140 Rockville Pike
Rockville, MD 20852
Read Our News at - https://dailypeacetimes.com/
Automotive Injector Nozzle Market Analysis and Demand with Forecast Overview to 2022
Contact Name: Fact Market Research
Contact Email: email@example.com
Contact Email: firstname.lastname@example.org